15/4 Ipe Multilayer Engineered Wood Flooring

1) Ipe engineered flooring 2) 7 time UV coating /traffert brand 3) Homag cut machine 4) CE certificate available

Ipe engineered flooring

Speices	Ipe + poplar and other hardwood mixed plywood
Size	310-1820mmx123x15/4mm
Average length	700mm
Constuction	Ipe top layer 4mm,base material plywood 11mm
Grade	Selected/AB
Joint system	T and G
Joint system cutter	Homag cut machine
Bevel	0.5mm micro bevel ( can be according to clients requirement)
Surface effect	UV lacqured 7 times coating,Traffert brand
Certificate	CE certificate available,Carbo certificate available
Moisture	8-10 %

The picture is as following

Technical data

Pieces/pack	8-12 pieces/carton
Length	1200mm, 900mm,1800mm,2200mm
Width	+/- 0.15mm tolerance
Thickness tolerance	+/- 0.2mm
Top Veneer thickness tolerance	+/-0.2mm
Height difference bewteen plans	Max 0.2mm,
Squareness tolerance	Max 0.2mm
Crook/ sweep	0.2mm
Bowing	Max 0.05% of board length
Bevel	Four sides Bevel 0.5mm+/- 0.1mm
Brushed effect	Refer to Sample
T&G	According to confrimed sample
Base material	Poplar / popar and birch plywood, other  hardwood mixed plywood
Moisture	6%-9%

FQA

What is engineered hardwood flooring?

A. Engineered hardwood flooring is a product made up of a core of hardwood, plywood or HDF and a top layer of hardwood veneer that is glued on the top surface of the core and is available in almost any hardwood species. The product thus has the natural characteristics of the selected wood species as opposed to a photographic layer. The “engineered” product has been designed to provide greater stability, particularly where moisture or heat pose problems for solid hardwood floors.

Q.What is the difference between a laminate, solid hardwood and an engineered hardwood floor

A. Laminate- core of product is typically made of High Density Fiber (HDF). The top layer is a photographic layer that should appear identical to the product it replicates, be it wood, vinyl, tile, etc. The product is generally 3/8” thick and is a floating install with tongue and groove glue less locking system which allows you to install and uninstall the floor several times if desired. This product is typically the least expensive. Solid Hardwood- the product is the solid natural wood species throughout the entire piece of flooring, typically with a tongue and groove installation. Good sanding and refinishing capabilities. The product is typically more expensive and has some limitations as to where it can be installed due to moisture issues.

Certificate

Homag cut machine

Joint system T &G

Traffert lacqured

Packing

15/4 Ipe Multilayer Engineered Wood Flooring